What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 00:05

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is where the MOV conducts again, and dissipated the energy.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
In schematic diagrams this is the symbol for a fuse:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
What should I do if I love a girl and she apparently doesn't love me?
Upvotes:
So, the voltage could go up to 500 volts, and the fuse will not open up.
These devices are installed between the “hot” and “neutral” and protective ground.
Why does TikTok allow porn stars in its platform? Isn't it aimed at teenagers?
2024–10–16 [ OO OLAOYE OYEBODE ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Cher’s son Elijah Blue Allman hospitalized after drug overdose: report - Page Six
First Sentence:
An AC voltage/ current source, and an ac inductive load.
This is 'the assistant's answer'
The third is lightning and “how it gets conducted into a home.”
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
what exactly is a ‘surge’ protector?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–10[John johnson John Johnson ]
so, what happens?
But… the neutral is now “floating” because of the 1 ohm resistance.
Would you date a Muslim guy? Why/why not?
This one hit behind the barn.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
How do military families balance personal political views with respect for civilian leadership?
(Dc diagram shown, AC is similar).
The bolt then partially travels down the line to your home.
a photo is worth a thousand words.
Do very hot men ever feel attracted to an ugly woman? Why?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
the problem then depends on "how fast does the fuse operate?".
Edit 2024–10.
But it can get overloaded, and no longer works.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One
Why does my girlfriend keep asking me if I love her?
Here is a simplified AC power diagram.
It also is a device that limits the change in current flow.
There are two important concepts here.
What would be the lowest score with 9 strikes and no gutter balls?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then asserts :
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
[old diagram got deleted by accident]
but this device (an Inductor) … impedes the rapid changes in the current.
There are three different concepts here that are getting confused.
For this case there are devices called Metal oxide varistors (MOV).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Now when you have a certain ac resistance, then a current flows in a loop.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
I post the exact comment here.
At least they know the answer if they wanted it.
This device then solves the entire problem.
Barnstars:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At one ohm, the resistor has a maximum of 1 watt power.
The other is “what does a “fuse” do?”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Because the load is inductive, the current lags the voltage.(by a bit).
He then describes the function of a fuse.
but I think this circuit , shows a few more pieces.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
nine
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
He then describes Rainy Season and Lightning.
These are simplified answers to the original question, and does not change anything I wrote above.
One is “what exactly is in a ‘surge protector’ ? ”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
eight
A circuit breaker is similar, but is resettable.
A fuse is a non-resetable over current circuit protector.
The MOV will conduct when the voltage exceeds 50% of line voltage.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
[image of Common-mode choke]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What does a fuse do?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What is lightning?